Specifications
Speed: 0.1 sec / 60 deg at 4.8V
Torque: 1.6 Kg – cm at 4.8V
Size: 21.8 X 11 X 19.8mm
Weight: 7G
Wire Length: 10cm
Pin Header: 2.54mm spacing

Wire Color Code
Red: Positive Power Input
Black: Negative Power Input
White: Signal Input

This item is the source code for the Button Code project. By downloading this code you will be able to program your own PIC chip for this project. There is no cost for this item! Add it to your cart and checkout, if asked for a payment method select credit card but since the value of the cart will be $0.00 you will not need to provide a credit card number. You will be provided with a download link when the checkout process is complete. The file will also be available in your order history for one week after the order is made. To see your order history click on the My Account link in the menu in the top right of the site.

The project information can be found here: Button Code

This software is being offered free of charge for personal use only, you are not allowed to use it for profit.

The source code for the Fish Tank Lights project. By downloading this code you will be able to modify the program for this project and program your own PIC chip. There is no cost for this item! Add it to your cart and checkout, if asked for a payment method select credit card but since the value of the cart will be $0.00 you will not need to provide a credit card number. You will be provided with a download link when the checkout process is complete. The file will also be available in your order history for one week after the order is made. To see your order history click on the My Account link in the menu in the top right of the site.

The project information can be found here: Fish Tank Lights

This software is being offered free of charge for personal use only, you are not allowed to use it for profit.

Uses LED's to display four tank colors.

Wiring inside control box.

Displays tank temperature and current light mode.

This item is the source code for the Gear Clock project. By downloading this code you will be able to program your own PIC chip for this project. There is no cost for this item! Add it to your cart and checkout, if asked for a payment method select credit card but since the value of the cart will be $0.00 you will not need to provide a credit card number. You will be provided with a download link when the checkout process is complete. The file will also be available in your order history for one week after the order is made. To see your order history click on the My Account link in the menu in the top right of the site.

The project information can be found here: Gear Clock

This software is being offered free of charge for personal use only, you are not allowed to use it for profit.

Note: Software orders prior to March 19, 2010 was sent the prototype version only, after this date the prototype and kit version is being sent out. If you need the kit version of the software please re-order.

The source code for the Hard Drive Clock project. By downloading this code you will be able to modify the program for this project and program your own PIC chip. There is no cost for this item! Add it to your cart and checkout, if asked for a payment method select credit card but since the value of the cart will be $0.00 you will not need to provide a credit card number. You will be provided with a download link when the checkout process is complete. The file will also be available in your order history for one week after the order is made. To see your order history click on the My Account link in the menu in the top right of the site. 

The project information can be found here: Hard Drive Clock

This software is being offered free of charge for personal use only, you are not allowed to use it for profit.

Hard Drive Clock in action.

Notice the LED's around the perimeter of the clock.

Clock control board (the brains)

This item is the source code for the IR Jammer project. By downloading this code you will be able to program your own PIC chip for this project. There is no cost for this item! Add it to your cart and checkout, if asked for a payment method select credit card but since the value of the cart will be $0.00 you will not need to provide a credit card number. You will be provided with a download link when the checkout process is complete. The file will also be available in your order history for one week after the order is made. To see your order history click on the My Account link in the menu in the top right of the site.

The project information can be found here: IR Jammer

This software is being offered free of charge for personal use only, you are not allowed to use it for profit.

This item is the source code for the Multimeter Clock project. By downloading this code you will be able to program your own PIC chip for this project. There is no cost for this item! Add it to your cart and checkout, if asked for a payment method select credit card but since the value of the cart will be $0.00 you will not need to provide a credit card number. You will be provided with a download link when the checkout process is complete. The file will also be available in your order history for one week after the order is made. To see your order history click on the My Account link in the menu in the top right of the site.

The project information can be found here: Multimeter Clock

This software is being offered free of charge for personal use only, you are not allowed to use it for profit.

This item is the source code for the Nerf Gun project. By downloading this code you will be able to program your own PIC chip for this project. There is no cost for this item! Add it to your cart and checkout, if asked for a payment method select credit card but since the value of the cart will be $0.00 you will not need to provide a credit card number. You will be provided with a download link when the checkout process is complete. The file will also be available in your order history for one week after the order is made. To see your order history click on the My Account link in the menu in the top right of the site.

The project information can be found here: Nerf Gun Hack part 1, part 2, part 3

This software is being offered free of charge for personal use only, you are not allowed to use it for profit.

This item is the source code for the PWM Fan Controller project. By downloading this code you will be able to program your own PIC chip for this project. There is no cost for this item! Add it to your cart and checkout, if asked for a payment method select credit card but since the value of the cart will be $0.00 you will not need to provide a credit card number. You will be provided with a download link when the checkout process is complete. The file will also be available in your order history for one week after the order is made. To see your order history click on the My Account link in the menu in the top right of the site.

The project information can be found here: PWM Fan Controller

This software is being offered free of charge for personal use only, you are not allowed to use it for profit.

This item is the source code for the Stair Lighting project. By downloading this code you will be able to program your own PIC chip for this project. There is no cost for this item! Add it to your cart and checkout, if asked for a payment method select credit card but since the value of the cart will be $0.00 you will not need to provide a credit card number. You will be provided with a download link when the checkout process is complete. The file will also be available in your order history for one week after the order is made. To see your order history click on the My Account link in the menu in the top right of the site.

The project information can be found here: Stair Lights

The prototype information including videos can be found here: Stair Lights

This software is being offered free of charge for personal use only, you are not allowed to use it for profit.

This project is now available as a kit in the Project Kits area

Stair lighting is automatically turned on when a beam is broken at the top or bottom of the stairs.

This item is used to pay for custom orders. For example if you have contacted us requesting special services that we don't offer as a standard store item this item is a convenient way to pay for it. Each item has a checkout value of $1.00, add multiple units to reach higher dollar values. For example if your custom order will cost $25 then simply add 25 of these items to your cart and checkout.

Please use the comments during checkout to describe what the payment is for.

If you have any questions please contact us.

 

If you have a special order item that is not a stock item in the store you can pay for the item here. Click the Yellow PayPal button below to take you to the secure PayPal payment page. Enter the dollar amount due and complete the PayPal payment process. You don't need a PayPal account to proceed, payment can be made using credit card, eCheck or PayPal.

If you have any questions please contact us.