Plug in power supply for the gear clock kit. The controller will accept a transformer that is rated at 12 Volts DC and has a current rating of 500mA (.5A) or greater. Stores such as Radio Shack will sell plug in wall transformers that will work fine.
The length of the stock power supply cable may not be long enough to reach your plug, we offer an optional power supply barrel to wire adapter which easily converts the barrel tip of the power supply to a terminal block output which an extension cable can easily be connected to.
The barrel connector adapter and wire extension wire are both optional, if you want them please add them from the options at the bottom of this page.
Note: The power supply pictured is for demonstration only, the one shipped might look different.
Optional Barrel to Wire Adapter (shown on the left)
